7662 AMCIPOWER SUPPLY DUAL MODEL

The following figure shows how a 7662 reads data from a SSI transducer. Note that the formal SSI
definition allows for twenty-four bits of data and a twenty-fifth stop bit. However, AMCI is aware of
some transducers that transmit more or less than twenty-five bits. To accommodate these transducers,
the 7662 can be programmed to accept up to thirty-two bits in the SSI bit stream

Category:
  • Email:cindy@justwellcenter.com
  • Phone:+86 13376981664
  • Whatsapp:+86 13376981664
  • Amy

Description

Brand:AMCI           Model number: 7662

Colour:new                   Warranty: 12 months

Lead Time:3-day working day   Country of origin: USA

Price: Please contact us         Product weight:1.8kg

Product Dimensions:

Use the information provided by the sensor’s manufacture to determine the type and maximum
length of cable that should be used to connect the sensor to the 7662 module.
• When plugged into the 7662 module, pin 1 is located in the upper left hand corner.
• Pin 1 is not connected to the PC board. It is intended as a convenient place to connect the
+24Vdc external supply to the SSI sensors. Only consider the sensor(s) current requirements
when sizing this power supply as the 7662 module does not use and is not connected to the
external +24Vdc supply.
• SSI Clk 1, SSI Data 1 and Latched Input 1 represent channel 1; SSI Clk 2, SSI Data 2 and
Latched Input 2 represent channel 2
• I/O Common (pins 3 and 4) are internally connected together and must be connected to the
common of the external power supply used to power the SSI sensors.
• Earth Grounds 1, 2, and o 3 (pins 2, 17, and 18) are internally connected together. The cable
shields should be connected to these terminals.
• The 7662 module can be tested by removing the sensor’s cable and wiring +Clock to +Data and
–Clock to –Data. This will cause the Actual SSI input data to be equal to zero. With the Clock
and Data signals open, the Actual SSI input data will be equal to (2(number of clock bits) -1).
• Transducer signals are generally low voltage, low power signals. If you are using A-B
guidelines for cabling installation, treat the transducer cable as a Category 2 cable. It can be
installed in conduit along with other low power cabling such as communication cables and low
power ac/dc I/O lines. It cannot be installed in conduit with ac power lines or high power ac/dc
I/O lines.
• Like all signal and communication cable, the transducer cable should be shielded. These shields
must be grounded only at one end of the cable. Because the rack cabinet is typically better
grounded than the machine, AMCI recommends that the cable shields be terminated at the 7662
module.
• If a junction must be made in the signal cable, treat the shield as a signal-carrying conductor. Do
not connect the shield to ground at any junction box or the transducer.
• If the signal cable must cross power feed lines, it should do so at right angles.
• Route the cable at least five feet from high voltage enclosures, or sources of “rf” radiation.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models:

ACCURAY 8-061588-002
ACCURAY QA-3-017948-003
ACCURAY 086370-001
ACCURAY 086158-004
ACCURAY 085221-001
ACCURAY 061552-001
Accu-Sort BoxPC-126M
ACME TA-1-81008
ACME TA-1-32406
ACME TA-1-81306
ACME T-1-53011
ACME TA-2-81003
Acquisition AL81G
ACS ACS-0400-PS
ACS SB1381-B-E-R-A-PM2
ACS SB1381-C-E-R-A
ACS SB214ND-F-9
ACS MOTION CONTROL HSSI-I016
ACT TCS-SRME-6210-CD-RTM
ACTION AIOI8100
ACTUS POWER NPSA-TMTA-222
ACUITY 002-PV900
ACUITY 010-PV9040
ADC FPL-72RP0W-1448B
ADDI-DATA APCI-1710
ADEMCO ADR1600E
ADEMCO HRM60N500
ADEMCO VISTA-250FBP
ADEPT Adept 101
ADEPT AWCII 040
ADEPT EJI90340-40000
ADEPT SCARA 550
ADEPT 10330-11350
ADEPT 10332-12350
ADEPT ASSY 10350-00100
ADEPT ADEPT AWCII 040
ADEPT AWCII-040
ADEPT 90402-40013/XY-HRS013-S1B1-AD
ADEPT 90402-40013
ADEPT 90400-20055/XY-HRS-055M201
ADEPT 90400-02100-EXTB01AD
ADEPT 90400-70030
ADEPT 90400-71031
ADEPT 10330-11350
ADIXEN FM36122
ADP ADP-1
ADRIVE E642B-MGB-K-01
ADTEC 3000III
ADTEC AXR-2000III
ADTEC AX-2000EUII-N
ADTEC AX-1000-AMII
ADTRAN 4200663L1
Advanced ICP-16L
ADVANCED DUO-I8030NM
ADVANCED 9R918W3
ADVANCED SB1391-C-R-C-A
Advanced MN3150272-006
Advantech PPC-105T-ABAR
Advantech FPM-3171G-XCE
Advantech WOP-2100T-N2AE
ADVANTEST R3265A
ADVANTEST BLF-022828 ACC-BOARD
ADVANTEST BLG-022829
ADVANTEST R6244
Advantest D3185A
AE RAPID-F
AEG 41-94384
AEG M907-122
AEG DEP220
AEG DTA200
AEG DTA201
AEG PC-A984-145
AEG MM-PM22-200
AEG MM-PM21400C
AEG MM-PM21-400
AEG PC-E984-381
AEG MM-PM22-300
AEG AS-P892-000
AEG M344-MKOA-4001
AEG CGC13-TB
AEG M135-H60A-OYOY-G3
Aerotech U100M-A-40-F5
AFE DP320T-BC
AGIE MJG-2129
AGILENT G2630-66015

Additional information

Weight 0.1 kg
Dimensions 10 × 10 × 10 cm