GPIB-USB-HS National Instruments Input module

Tut and output signal connections to
y6503 via the board I/O connector.
CautionConne ratings of input or output signals
on your DIO bomputer. The description of each
signal in this chmum input ratings. National
Instruments is nm signal connections that exceed
these maximum ratings.
NoteFor information on adding signal conditioning into your applications and National Instruments signal conditioning devices, go to ni.com/signalconditioning.
  • Email:cindy@justwellcenter.com
  • Phone:+86 13376981664
  • Whatsapp:+86 13376981664
  • Amy

Description

Brand:National Instruments        Model number:GPIB-USB-HS

Colour:new                                      Warranty: 12 months

Lead Time:3-day working day   Country of origin: USA

Price: Please contact us         Product weight:0.34kg

Product Dimensions:

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable protection against harmful interference when the product is operated in the intended operational electromagnetic environment. This product is intended for use in industrial locations. However, harmful interference may occur in some installations, when the product is connected to a peripheral device or test object, or if the product is used in residential or commercial areas. To minimize interference with radio and television reception and prevent unacceptable performance degradation, install and use this product in strict accordance with the instructions in the product documentation. Furthermore, any modifications to the product not expressly approved by National Instruments could void your authority to operate it under your local regulatory rules.
Caution To ensure the specified EMC performance, operate this product onl
For a Network Administered by a Network Administrator
If you are adding the GPIB-ENET/100 to an existing Ethernet network, you must choose IP addresses carefully. Contact your network administrator to obtain an appropriate static IP address for your GPIB-ENET/100. Also have the network administrator assign the proper subnet mask, gateway, and DNS server addresses.
For a Network without a Network Administrator
If you are assembling your own small Ethernet network, you can choose your own IP addresses. The format of the IP addresses is determined by the subnet mask. You should use the same subnet mask as the computer you are using with your GPIB-ENET/100. If your subnet mask is
255.255.255.0, the first three numbers in every IP address on the network must be the same. If your subnet mask is 255.255.0.0, only the first two numbers in the IP addresses on the network must match.
Turn on the front-panel power switch. The PWR/RDY LED blinks orange while the GPIB-ENET/100 completes its power-on self-tests and attempts to acquire its network parameters. Each Ethernet and GPIB LED lights as its functionality is tested. By default, the GPIB-ENET/100 attempts its network configuration automatically through DHCP. The time required for assigning the IP address depends on your network and the configuration of your GPIB-ENET/100. Allow up to 90 seconds and observe the state of the
PWR/RDY LED to determine the outcome of the self tests. One of the following should occur: ï A steady yellow PWR/RDY LED indicates the GPIB-ENET/100 passed its self tests and acquired its IP address. The unit is now ready to operate. When using DHCP, the GPIB-ENET/100 typically is ready to operate about 15 seconds after you power it on. ï If the PWR/RDY LED continues to blink orange, the unit was unable to use DHCP to configure its network parameters. It is now in network configuration mode. Refer to
Ethernet Configuration for information on configuring the network parameters manually. If this utility is successful, the PWR/RDY LED should become steady yellow. ï If the PWR/RDY LED flashes a slow red/yellow pattern, the GPIB-ENET/100 did not pass its self tests. Refer to PWR/RDY LED Signaling to interpret the flash pattern before calling National Instruments Technical Support. ï If the PWR/RDY LED is steady red, the GPIB-ENET/100 has an unrecoverable error. Contact National Instruments Technical Support.

 

Please make an inquiry for more models:

NI BNC-2121
NI CB-50LP
NI CB-68LP
NI CFP-2110
NI CFP-AI-111
NI CFP-AO-200
NI CFP-CB-1
NI CFP-CB-3
NI CFP-RTD-122
NI FP-DO-400
NI GPIB-140A
NI PCI-1407
NI PCI-1411
NI PCI-20428W-1AN
NI PCI4060
NI PCI-4065
NI PCI4070
NI PCI4451
NI PCI4461
NI PCI4462
NI PCI4472
NI PCI-4474
NI PCI-5124
NI PCI-5152
NI PCI6023E
NI PCI-6024
NI PCI-6071E
NI PCI-6122
NI PCI-6123
NI PCI-6133
NI PCI-6154
NI PCI-6224
NI PCI-6229
NI PCI-6230
NI PCI-6236
NI PCI-6250
NI PCI-6259
NI PCI-6281
NI PCI-6561
NI PCI-6703
NI PCI-6704
NI PCI-6723
NI PCI-7340
NI PCI-7342
NI PCI-7390
NI PCI-7833R
NI PCI-8330
NI PCI-8331/8336
NI PCI-CAN/XS2
NI PCI-DIO-32HS/PCI-6533
NI PCIE-1427
NI PCIE-6321
NI PCIE-6343
NI PCI-MXI-2
NI PCLE-6548-781012-03
NI PX-610A-00E
NI PXI-1033
NI PXI-1045
NI PXI-2532
NI PXI-4071-778271-01
NI PXI4461
NI PXI4462
NI PXI4472
NI PXI-4498
NI PXI-6070E
NI PXI-6122
NI PXI-6225
NI PXI-6230
NI PXI-6236
NI PXI-6251
NI PXI-6259
NI PXI-6508
NI PXI-6533
NI PXI-8101
NI PXI-8106
NI PXI-8115
NI PXI-8176
NI PXI-8187
NI PXI-8221
NI PXI8331
NI PXI-8331/8336
NI PXI-8431-8
NI PXI-8432/2
NI PXI-8461
NI PXIE-6363
NI PXIE-6528
NI PXIE-8135
NI PXIE-8431/16
NI PXI-GPIB
NI PXI-PCI8331
NI PXI-PCI8360
NI PXLE-1085-781813-01
NI PXLE-4353
NI PXLE-5186-782058-02
NI PXLE-6556-781949-02
NI PXLE-8135-782450-04

Additional information

Weight 0.1 kg
Dimensions 10 × 10 × 10 cm