PM866K01 ABB Processor Unit

Switch over time in red.conf. Max 10ms
No. of applications percontroller 32
No. of programs per application 64
No. of diagrams per application 128
No. of tasks percontroller 32
Number of differentcycle times 32
Cycle time per application programs Down to 1 ms
Flash PROMfor firmware storage 4MB
Power supply 24V DC (19.2-30 V DC)
Powerconsumption +24V typ/max 210 / 360mA
Power dissipation typ. 5.1 W (8.6 W max)
Redundant power supply status input Yes
Built-in back-up battery Lithium, 3.6 V
Clock synchronization 1 ms between AC 800Mcontrollers by CNCP protocol
Event queue in controller per OPC client Up to 3000 events
AC 800Mtransm. speed toOPC server 36-86 events/sec,113-143 data messages/sec
Comm. modules on CEX bus 12
Supplycurrent on CEX bus Max 2.4A
I/O clusters onModulebus with non-red. CPU 1 electrical + 7 optical
I/O clusters onModulebus with red. CPU 0 eletrical + 7 optical
I/O capacity onModulebus Max 96 (single PM866) or 84(red. PM866) I/O modules
Modulebus scan rate 0 -100ms (actual time depending on number of I/O modules)
Supplycurrent on Electrical Modulebus
24V : max 1.0 A
5 V : max 1.5 A
Ethernetchannels 2
Ethernet interface Ethernet (IEEE 802.3),10Mbit/s, RJ-45, female (8-pole)
Control Network protocol MMS (Manufacturing Message Service) and IAC (Inter Application
Communication)
Recommended Control Network backbone 100Mbit/s switched Ethernet
Real-time clock stability 100 ppm (approx.1 h/year)
RS-232C interface 2 (one general,1 for service tool)
RS-232C interface (COM3) (non red. only)
RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTSCTS support
RS-232C interface (COM4) (non red. only)
RS-232C, 9 600 baud, RJ-45 female (8-pole), opto isolated, no RTS-CTS
support
Environment and certification
Temperature, Operating +5 to +55 °C (+41 to +131 °F)
Temperature, Storage -40 to +70 °C (-40 to +158 °F)
Temperature changes 3 °C/minutes according to IEC/EN 61131-2
Pollution degree Degree 2 according to IEC/EN 61131-2
Corrosion protection G3 compliant to ISA 71.04
Relative humidity 5 to 95 %, non-condensing
Emitted noise < 55 dB (A)
Vibration
10 < f < 50Hz: 0.0375 mm amplitude, 50 < f < 150Hz: 0.5 g acceleration, 5 <
f < 500Hz: 0.2 g acceleration
Rated Isolation Voltage 500 V a.c.
Dielectrictestvoltage 50 V
Protection class IP20 according to EN 60529, IEC 529
Altitude 2000m according to IEC/EN 61131-2
Emission & Immunity EN 61000-6-4, EN 61000-6-2
Environmentalconditions Industrial
CEMark Yes
Electrical Safety EN 50178, IEC 61131-2, UL 61010-1, UL 61010-2-201
Hazardous location UL 60079-15,cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X
ISA Secure certified Yes
Marine certificates DNV-GL (currently PM866: ABS, BV, DNV-GL, LR)
TUV Approval No
RoHS compliance EN 50581:2012
WEEE compliance DIRECTIVE/2012/19/EU
Dimensions
Width 119 mm (4.7 in.)
Height 186 mm (7.3 in.)
Depth 135 mm (5.3 in.)
Weight (including base) 1200 g (2.6 lbs)